interior stress
英 [ɪnˈtɪəriə(r) stres]
美 [ɪnˈtɪriər stres]
网络 内应力
双语例句
- This process will bring the glass surface compressive stress and the interior tensile stress which can improve the mechanical strength of glass by gemination and result in good thermal stability.
钢化玻璃受极热时，表面产生压应力，由于玻璃的抗压应力是抗张应力的数倍，所以钢化玻璃也可以承受一定的急热温度。 - Inner stress: Inner stress is the stress which balances the object interior without exterior stress.
内应力：内应力是在没有外力条件下平衡于物体内部的应力。 - In areas on both sides of faults and within the interior of faults, stresses are usually lower than the regional stress.
④多数断层两侧一定范围内以及断层内部是相对的低应力区。 - On the exterior, he was cool, calm and collected but on the interior, stress was killing him.
表面上，他显得沉着、冷静和泰然自若，但他内心深处的压力使他筋疲力尽。 - Research methods: Its interior stress characteristics and distributional rule of extra stress are studied by three dimension numerical simulation in this paper, and consummate the structure design.
研究方法：通过理论分析和三维数值模拟，研究其内部应力状况和附加应力分布规律，用以指导和完善承压结构设计； - The reasons of temperature gaps in concrete, control of concrete temperature and measures for preventing the temperature gaps are described as the conclusion of years of practice in construction supervision and reading of books on interior stress of concrete.
经多年的施工监理实践，在查阅有关混凝土内部应力方面的专著后，对混凝土温度裂缝产生的原因、现场混凝土温度的控制和预防混凝土温度裂缝的措施进行阐述。 - At the same time, the companies face tremendous challenges from exterior and interior, they also face the stress by the economy globalization.
同时，企业也面临着来自内外部的巨大挑战，面临着经济全球化所带来的竞争压力。 - This article discusses the damage of interior residual stress to the low temperature equipment and heat treatment technology for the low temperature equipment.
文中重点叙述了低温设备内残留应力的危害，低温设备热处理的方法、工艺和加热温度的确定。 - Based on the study considering the effect of material properties and frictional force on stress and strain as well interior stress in metal blank whiling deep drawing, the research result are beneficial of choose of material, mould design and analysis of products quality.
由于本文在研究中考虑了材料性能及摩擦阻力对板料拉深过程应力应变的影响和不同部位的内应力变化，因此，研究可为拉深材料选择、模具设计及产品质量分析提供借鉴。 - An experimental study of inlaid circular ring under impact force on interior boundary is also conducted. The result shows that the stress is distributed in a limited scope.
文中还对内边界受冲击力作用的镶嵌圆环进行了动光弹实验，结果表明，应力分布局限在有限范围内。 - This paper deals with the surface stress field of aluminum as a reinforcement of aluminum-plastics composite pipes at a constant interior pressure based on the stress analysis model and FEM.
基于有限元软件，分析了铝塑复合管承压条件下增强体铝表面应力场。 - With the intensification of market competition in civil bank industry, the domestic banks are in face of interior and exterior huge competition stress.
近几年，国内银行业的市场竞争日益激烈，各商业银行正经受着来自内部和外部的巨大压力。 - The Interior Stress Distribution on Railway Worn Profile Wheel and Rail Under the Action of Three Directional Loading
三向载荷作用下铁路磨耗型车轮和钢轨的接触应力分析 - Based on the theory of flexible groundsill and sheet, a mechanical model moving along free lane is built, and the character of the movement of crest and interior or exterior stress place analyzed.
运用弹性地基及薄板理论建立沿空掘巷顶板运动的力学模型，并用该模型分析了顶板的挠曲运动和内、外应力场。 - This paper deals with the surface stress distribution resulting from applying a uniform radial load to the interior of the metal reinforcement of composite pipes based on the stress analysis model and FEM.
根据应力分析模型并借助于有限元分析，研究了在复合管增强体内表面施加均匀径向载荷后表面的应力分布； - By using the tension-line calculation method, the interior tension stress can be calculated and, by using max press stress of chosen soil, the distance between track rollers can be found.
在行走装置设计上，提出采用悬链线计算方法用于履带张紧装置预张力、采用土壤最大压应力计算支重轮的间距两种新的观点。 - The interior environment quality includes factors like interior air quality, comfortable degree, noise, social psychological stress, social work pressure, workplace background etc., which affect people physiologically and mentally in a single or a Comprehensive way.
室内环境品质是指室内空气品质、舒适度、噪声、照明、社会心理压力、工作压力、工作区背景等因素对室内人员生理和心理上的单独和综合作用。 - Based on the theories of elasticity, energy conservation law and the basic principles of the hypothesis of interior stress, a series of equations describing size effect of the strength and elastic modulus of brittle materials are set up.
根据弹性力学、能量守恒定律以及内应力假说的基本原理，从材料的非均一性、多相性出发，建立了一组描述脆性材料强度指标和弹模指标尺寸效应的方程。 - According to the requirement of the compatibility of both interior and boundary displacements for an element and the equilibrium of the stress field of the element, we derive the finite element formulas which include only the unknown nodal displacements.
根据单元体边界和内部位移的协调内插以及满足单元体内应力平衡的应力分布假定，列出了有限元公式，而最后的矩阵公式中只包含节点未知位移。 - By way of theoretical analysis, and numerical calculation and photoelastic test, this thesis analyses the interior stress distribution on railway worn profile wheel and rail under the action of three-directional loading, and obtains a series of important results.
本文用理论分析方法，并结合数值计算和光弹实验，分析了铁路磨耗型车轮与钢轨在三向载荷作用下内部的应力场分布，得到了一些重要结果。 - Study on measurement method of interior stress distributions in engineering rolled-plates
板类构件内部残余应力测试技术研究 - The results shows the surface harden by Laser Transformation Hardening is 30 per more than by carburization hardening and the wear-resistance increase one double and especially, most of the residual stress of the interior of the material is changed into compressive stress.
试验结果表明：激光相变硬化层硬度比渗氮淬火提高了30%，耐磨性提高了1倍，表面残余应力为压应力； - Then we can know of something, which is the performance of steel frame of every period, the law of deformation and change of interior heat stress.
了解到这一钢框架在火灾发展的各个阶段的各种反应，并总结出结构变形、热量传递、内部应力变化的一些规律。 - The result of numerical analysis illuminates that the stress of concrete bridge panel near interior supports is always compress stress during the construction. The prestressing of the bridge can avoid the cracks in concrete in the area with negative moment.
不同施工阶段的分析表明，设计采用的预应力方法可以使内支座处混凝土桥面板保持压应力状态，有效防止负弯矩区混凝土的开裂。 - Furthermore, interior stress state in metal blank also is discussed based on micro-contact stress at different deep drawing node.
并基于拉深成形过程中节点处的接触状态从微观上分析了板料在不同部位的内应力变化。 - Study on the interior residual stress of metal surveyed by x-ray method
采用X射线法测算金属材料内部残余应力的研究 - Emitting longitudinal critically refracted ( Lcr) wave, this technology is called settled-distance refractometry technique that is practicability to detect the interior stress produced in different depth with different frequency ultrasonic transducer.
这样采用临界折射纵波（LCR波），设计出固定距离折射法，应用不同频率的探头，对于测量构件平面以下的不同深度的内部应力具有很好的实用性。 - Based on the homogeneous deformation, the equation for the good strip shape zone is derived on the critical condition that the working of the interior stress is equal to the undulating flex strain energy.
以等延伸为前提，按内应力作功等于屈曲起浪应变能的临界条件，导出了规定良好板形区的方程式。 - Land subsidence, as the exterior manifestation of the earth-water interaction and the interior stress change, is closely related to soil deformability and water seepage.
地面沉降是土和水相互作用、内部应力发生变化的外在表现。它与土的变形特性和水的渗流情况密切相关。 - The wedge-shaped jig can solve the jig interior stress uneven problem, and overcame the former jig construction cycle to be long, operation complex and so on flaws.
楔形夹具能解决夹具内部受力不均的问题，并且克服了以往夹具施工周期长，操作复杂等缺陷。